Kyocera FS-1300D 1 *Off, 2Bind Long Edge 3Bind Short Edge, Override A4/LTR: a b 1*Off 2On, Duplex

Duplex:	a b
1 *Off

2Bind Long Edge

3Bind Short Edge

1In the Print Settings menu, press U or V to select Duplex.

2Press [OK]. The Duplex screen appears showing the list of available duplex printing modes.

3Press U or V to select the desired duplex printing mode. The message display toggles through the following:

Off (default)

Bind Long Edge Bind Short Edge

Selecting Off disables duplex printing.

Override A4/LTR: a b 1 *Off

2On

4Press [OK]. The duplex printing mode is set and the Print Settings menu reappears.

Override A4/LTR (Overriding difference between A4 and Letter)

When the Override A4/LTR is turned On using the operation panel, the printer ignores the difference between A4 and Letter paper sizes. Printing is performed without an error message even if the actual paper size in the current cassette differs from the paper size formatting the job.

By default, this feature is On.

1In the Print Settings menu, press U or V to select Override A4/ LTR.

2Press [OK]. The Override A4/LTR screen appears showing the shared paper feed mode settings.

3Press U or V to select the desired shared paper feed mode.

4Press [OK]. The shared paper feed mode is set and the Print Settings menu reappears.

Emulation Set. (Setting the emulation)

You can change the emulation mode for the current interface. Use the procedure below to select the mode.

1In the Print Settings menu, press U or V to select Emulation Set..

4-48 Using the Operation Panel