Kyocera FS-1300D Quick Copy, User01, User02, lUser03, Data01, QData02 QData03 Delete, Copies

Quick Copy:		a b
l	User01
l	User02

lUser03

l	User01:	a b
Q	Data01

QData02

QData03

[ Delete ]

Copies: a b

(1 - 999) /**1-copies

M

Print.

Are you sure? z Q Data01

[ Yes ] [ No ]

Using Proof-and-Hold

When you print multiple copies, this mode first prints one copy so that you can proof it before continuing to print the remaining copies. Since you can proof the printouts before printing the remaining copies, wastage of paper can be reduced.

The printer prints one copy and, at the same time, saves the print job on the hard disk/RAM disk. You can also change the number of copies when resuming printing from the operation panel.

When the printer is turned off, all stored jobs will be deleted.

Note Refer to KX Printer Driver User Guide for the driver settings.

Printing Remaining Copies of a Proof-and-Hold Job

1In the Job Box menu, press U or V to select Quick Copy.

2Press [OK]. The Quick Copy screen appears listing the user names for stored jobs.

3Press U or V to select the user name you entered in the printer driver.

4Press [OK]. The printer displays a list of the jobs stored under the selected user name.

5Press U or V to select the name of the job to be printed.

6Press [OK]. The Copies menu screen appears.

If you want to change the number of remaining copies to be printed, use the arrow keys to set the number of copies to be printed.

Press U or V to increase or decrease, respectively, the value at the blinking cursor.

Use Y and Z to move the cursor right and left.

7Press [OK]. A confirmation message is displayed.

4-24 Using the Operation Panel