Kyocera FS-1100, FS-C5400DN, FS-1300D manual KPDL error

Message		Corrective Action
		Current print processing cannot continue because of occurrence of KPDL error
	KPDL error.	which is categorized by ##. To print out an error report, display KPDL Error
	Press [OK].	Rpt. from the menu system, and select On. Press [OK] to resume printing. You
		can abandon printing by pressing [Cancel].
		If Auto Error Clear is set to On, printing will be automatically resumed after a
		preset period of time.
		The paper cassette matching the paper size and paper type of the print job is
	Add paper in casset.#	empty. Load paper into the paper cassette as displayed in place of #. Press
		[OK] to resume printing.
		If you want to print from a different paper source, press U or V to display
		Alternative: and you can change the source for paper feeding. After
		selecting a paper source and pressing [MENU], Paper Settings appears. By
		pressing the U, the paper type settings menu appears. After setting the correct
		paper type, press [OK] and printing starts.
		There is no paper cassette installed in the printer that matches the paper size
	Add paper in MP tray.	and paper type of the print job. Set paper in the MP tray. Press [OK] to resume
		printing. (Note that feeding the paper having a paper size which does not match
		the current paper size from the MP tray can cause paper jam.)
		If you want to print from a different paper source, press U or V to display
		Alternative: and you can change the source for paper feeding. After
		selecting a paper source and pressing [MENU], Paper Settings appears.
		By pressing the U, the paper type settings menu appears. After setting the
		correct paper type, press [OK] and printing starts.
		This message is displayed when Low was selected in Security Level.
	Low security

	The total amount of data received by the printer exceeds the printer’s internal
Memory is full.
	memory.
Print job cannot be	Try adding more memory. Press [OK] to resume printing. You can abandon
processed completely.	printing by pressing [Cancel].
	If Auto Error Clear is set to On, printing will be automatically resumed after a
	preset period of time.
	A memory card error has occurred. Look at the error code given in place of ##
Memory card error.	and refer to Memory Card and USB Memory Errors on page 6-15. To return the
Press [OK].	printer to the print-ready status, press [OK].
##

6-10 Troubleshooting