Kyocera FS-1100 manual Service Setting: a b 1Service Status, 2Network Status 3Test Page Exit Print

Service Setting: a b

1Service Status

2Network Status

3Test Page

[ Exit ]

Print.

Are you sure?

z Service Status

[ Yes ] [ No ]

Service Setting (for Maintenance)

The options available in Service are as follows:

•Service Status (Printing the service status page)

•Network Status (Printing the network status page)

•Test Page (Printing the test page)

•Maintenance (New Maintenance Kit replacement confirmation setting)

•DEV-CLN (Developer/Refresh mode setting)

•Drum (Drum/Refresh mode setting)

•LSU (LSU cleaning mode setting)

IMPORTANT Service is primarily a menu used by service personnel for maintenance work. There is no need for customers to use this menu. Also, Maintenance only appears when Replace MK. is displayed.

1In the Adjust/Maint. menu screen, press U or V to select Service Setting.

2Press [OK]. The Service Setting menu screen appears.

Service Status (Printing the service status page)

The service status page contains printer settings information that is more detailed than the standard status page and is therefore mostly for service purposes. However, there is a great deal of information on the service status page that may be useful to you.

1In the Service Setting menu, press U or V to select Service Status.

2Press [OK]. A confirmation screen appears.

If Job Accounting is enabled, a confirmation screen appears after department login.

Press [Yes] ([Left Select]). Accepted. appears and printing begins.

Pressing [No] ([Right Select]) returns you to the Service Setting menu screen without printing the service status page.

4-106 Using the Operation Panel