Kyocera FS-1100, FS-C5400DN Network Network settings, 1TCP/IP Settings Exit TCP/IP Settings: a b

Models: FS-1100 FS-1300D FS-C5400DN

1 223
Download 223 pages 29.47 Kb
Page 113
Image 113
Network:

Network:

a b

1TCP/IP Settings

[ Exit ]

TCP/IP Settings: a b

1TCP/IP

2IPv4 Setting

3IPv6 Setting

[ Exit ]

Network (Network settings)

This printer supports TCP/IP and TCP/IP (IPv6) protocols.

IP is an abbreviation for Internet Protocol. This printer routinely uses the TCP/IP (IPv4) protocol, but provides a separate setting for the next- generation IP, IPv6.

TCP/IP (IPv4) uses 32-bit IP addresses, but the rapid growth in the number of Internet users has resulted in a shortage of IP addresses. IPv6 was developed to expand the range of available IP addresses by using

128-bit IP addresses.

Note After all network related settings have been done, turn the machine OFF and ON again. This is mandatory to make the settings effective!

The options available in the Network settings are as follows:

TCP/IP (Enable/Disable TCP/IP)

IPv4 Setting (TCP/IP IPv4 settings)

IPv6 Setting (TCP/IP IPv6 settings)

Note Check with your network administrator when selecting the network setting. After all network related settings have been done, turn the machine OFF and ON again.

1In the Print Settings menu, press U or V to select Network.

2Press [OK]. The Network menu screen appears.

3Select TCP/IP Settings and press [OK]. The TCP/IP Settings menu screen appears.

Using the Operation Panel

4-55

Page 113
Image 113
Kyocera FS-1100, FS-C5400DN, FS-1300D manual Network Network settings, 1TCP/IP Settings Exit TCP/IP Settings: a b