Kyocera FS-1300D 0123456789, Bckspace Enter Delete Are you sure? z Q Data01, Copies, 0000-9999

Copies: a b

(1 - 999) /**1-copies

M

Print.

Are you sure? z Q Data01

[ Yes ] [ No ]

Accepted.

ID:		P b
(0000-9999)
	S
0123456789

[Bckspace] [ Enter ]

Delete.

Are you sure? z Q Data01

[ Yes ] [ No ]

8Press [Enter] ([Right Select]). If the entered access code is correct, the Copies menu screen appears.

If the entered access code is incorrect, the ID menu screen reappears.

To print 2 or more copies, use the arrow keys to set the number of copies to be printed.

Press U or V to increase or decrease, respectively, the value at the blinking cursor.

Use Y and Z to move the cursor right and left.

9Press [OK]. A confirmation message is displayed.

10Press [Yes] ([Left Select]). The message Accepted. appears and the printer prints the selected job.

Pressing [No] ([Right Select]) returns you to the Job Box menu without printing the job.

Deleting a Private/Stored Job

You can individually delete stored jobs by performing the following procedure. Jobs saved using Private Print will be automatically deleted if you turn the power off after printing, but jobs saved using Stored Job will not be deleted automatically.

1Refer to steps 1 to 5 in Private/Stored (Printing a Private Print/Stored Job) on page 4-26to select the job to be deleted.

2Press [Delete] ([Right Select]). The ID menu screen appears.

3Enter the access code entered in the printer driver.

Use the Y or Z to select a number and then press [OK] to enter the number.

You can go back one character by pressing [Bckspace] ([Left Select]).

4Press [Enter] ([Right Select]). If the entered access code is correct, the Delete menu screen appears. If the entered access code is incorrect, the ID menu screen reappears.

Using the Operation Panel 4-27