Kyocera FS-C5400DN manual General Description of Options, Memory Card, PF-500, PF-510Paper Feeder

General Description of Options

Memory Card

The printer is equipped with a slot for a memory card with the maximum size of 4 GB. A memory card is useful for storing fonts, macros, and overlays.

Reading the Memory Card

Once inserted in the printer’s slot, the contents of the memory card can be read from the operation panel or automatically when you power on or reset the printer. To manually read data in the memory card, refer to Format Mem. Card (Formatting the memory card) on page 4-69.

Formatting the Memory Card

To use an unused memory card, you must first use the printer to format the memory card.

	1	Switch off the printer, remove the electrical cord and then remove the
		main controller unit. To read how to remove the main controller unit,
		refer to the section on inserting the memory module.
Memory	2	Insert the memory card into the memory card slot.
Card Slot

PF-500, PF-510 Paper Feeder

The optional paper feeder PF-500 (for plain paper) and PF-510 (for multiuse media) will each hold approximately 500 sheets of paper. Up to 4 optional feeders can be added to the bottom of the printer, allowing continuous feeding of up to 2,500 sheets of paper when combined with the printer's own cassette.

IMPORTANT When you use the paper feeder, place the papers and envelopes print-side up.

The papers that can be used in the cassettes supplied with the paper feeders are as follows:

PF-500 :

Paper size : Envelope Monarch, Envelope #10, Envelope #9, Envelope #6, Envelope DL, Envelope C5, A5, B5, ISO B5, A4, Executive, Letter, Legal, OufukuHagaki, Oficio II, Statement, Folio, Youkei 2, Youkei 4, 16K and Other (92 x 165 mm to 216 x 356 mm)

Paper type : Plain, Preprinted, Bond, Recycled, Rough, Letterhead, Color, Prepunched, High Quality, CUSTOM 1 (to 8)

A-9