Kyocera FS-1100, FS-C5400DN, FS-1300D manual Security Security function setting

Admin. ID:		P b
	(1 - 16 digit)
		S
0123456789
[Bckspace] [		Next ]

Security (Security function setting)

The security functions can be set up to protect printer operation and the print data.

IMPORTANT To specify the Security function settings, you must enter an administrator ID and password. For information on how to set the administrator ID and password, refer to Administrator (Administrator settings) on page 4-94.

The options available in Security are as follows:

•Network Security (Network security setting)

•I/F Block Set. (External interface block setting)

1Press [MENU].

2Press U or V to select Security.

3Press [OK]. The Admin. ID screen appears.

Admin. Password: P b

(0 - 16 digit)

S

0123456789

[Bckspace] [ Login ]

4Enter the administrator ID. Use the Y or Z to select a number and then press [OK] to enter the number.

You can go back one character by pressing [Bckspace] ([Left Select]).

5Press [Next] ([Right Select]). The Admin. Password screen appears.

Security: a b

1Network Security

2I/F Block Set.

3Security Level

[ Exit ]

6Enter the administrator password. Use the Y or Z to select a number and then press [OK] to enter the number.

You can go back one character by pressing [Bckspace] ([Left Select]).

7Press [Login] ([Right Select]). If the entered ID and password are correct, the Security menu screen appears. If the entered ID and password are incorrect, the Admin. ID menu screen reappears. (You are returned to step 3.)

4-76 Using the Operation Panel