Kyocera FS-1100 IPP over SSL: a b 1*Off 2On, Https, IPP over SSL SSL Server IPP over SSL setting

IPP over SSL: a b 1 *Off

2On

IPP over SSL (SSL Server IPP over SSL setting)

IPP over SSL is an encryption function that uses SSL for communications between users and servers in network printing. To use IPP over SSL, both server and client must support the protocol. The default setting is Off.

1In the SSL Setting menu, press U or V to select IPP over SSL.

2Press [OK]. The IPP over SSL screen appears.

HTTPS:		a b
1	Off
2	*On

3Press U or V to select whether IPP over SSL is enabled.

4Press [OK]. The IPP over SSL setting is set and the SSL Setting menu reappears.

HTTPS (SSL Server HTTPS setting)

HTTPS (HyperText Transfer Protocol Secure) is a protocol that adds SSL data encryption, message authentication and a digital signature function to the HTTP protocol used for data transfer between WWW servers and clients.

S-HTTP is a similar protocol, but HTTPS differs in that it uses SSL. The default setting is On.

1In the SSL Setting menu, press U or V to select HTTPS.

2Press [OK]. The HTTPS screen appears.

3Press U or V to select whether HTTPS is enabled.

4Press [OK]. The HTTPS setting is set and the SSL Setting menu reappears.

IPSec (IPSec setting)

IPSec (IP Security Protocol) is a security protocol adopted as the standard by the IETF for authentication and encryption in the third network layer (IP layer).

It can be used with both IPv4 and IPv6.

Note IPv4 uses 32-bit IP addresses and IPv6 uses 128-bit IP addresses.

The default setting is On.

1In the Network Security menu, press U or V to select IPSec.

4-82 Using the Operation Panel