Kyocera FS-C5400DN, FS-1300D, FS-1100 MP Tray Set.: a b 1Paper Size 2Media Type, 1 *Plain, Exit

MP Tray Set.: a b

1Paper Size

2Media Type

[	Exit ]
Media Type:	a b
1 *Plain

2Transparency

3Preprinted

[ Exit ]

2Press [OK]. The MP Tray Set. menu screen appears.

3Press U or V to select Media Type.

4Press [OK]. The Media Type screen appears listing the media types that can be supplied from the MP tray.

The available paper sizes are as follows:

Plain Transparency Preprinted Labels Bond Recycled Vellum Rough Letterhead Color Prepunched Envelope Cardstock Coated Thick HighQuality CUSTOM1 to 8

5Press U or V to select the desired media type.

6Press [OK]. The media type for the MP tray is set and the Paper Settings menu screen reappears.

Cassette (1 to 5) Set. (Settings for the cassettes)

To print correctly on paper supplied from the cassettes, use the procedure below to set the paper size and media type.

Cassette (1 to 5) Size (Setting the cassette paper size)

To set the standard sizes A5, A4, B5, Letter, and Legal size for the paper cassette, load the paper and turn the paper size dial so that the size of the paper you are going to use appears in the paper size window. To load a non-standard paper size (sizes other than A5, A4, B5, Letter, Legal and A6 (paper cassette)) into a paper cassette, refer to the custom paper sizes listed on page 4-36.

If the PF-500 or PF-510 optional paper feeder is installed, use the same procedure to load paper into the paper feeder cassettes.

Using the Operation Panel 4-35