Agilent Technologies E1470A user manual Appendix a RF Switch Specifications

Appendix A

RF Switch Specifications

Configuration:			3dB Bandwidth:
80 signal connections			3:1 Multiplexer:		500 MHz
60 inputs (channel numbers xx0 through xx2)			30:1 Multiplexer:		200 MHz (30:1 specifications apply
20 commons (channel numbers COMxx)					for channels 000 - 132 to COM05 or
One 60:1, two 30:1,... up to 20 3:1 multiplexers					channels 200 - 332 to COM25
can be configured					multiplexers)
			60:1 Multiplexer:		100 MHz
Terminated Isolation:			VSWR (Voltage Standing Wave Ratio) for a 3:1
10 MHz:	80 dB		Multiplexer:
100 MHz:	60 dB		100 MHz:	1.4
200 MHz:	50 dB		200 MHz:	1.45
500 MHz:	40 dB		500 MHz:	1.7
VSWR (Voltage Standing Wave Ratio) for a 30:1			VSWR (Voltage Standing Wave Ratio) for a 60:1
Multiplexer:			Multiplexer:
200 MHz:	1.5		100 MHz:	1.5
(30:1 muxs are channels 000 - 132 to COM05 or
channels 200 - 332 to COM25 multiplexers)
Characteristic Impedance:			Power Consumption:
50Ω			+5 Volt power supply, 3.5A (all relays closed)
Relay Ratings:			A16 Register-based device:
Maximum RF Power:		10W	A16 Register-based Slave-only device as defined in the
Switch Life: no load:		5x106 closures	VMEbus standard and the VXIbus specification, rev. 1.4.
0.01A @ 24 Vdc:		3x105 closures
10 Watts RF:		1x105 closures
Power-on/Reset State:
Channel xx0 connected to COMxx. Channel 0 in each 3:1
is connected to its respective common.

Appendix A RF Switch Specifications 39