Quantum 1103 Series, 1103 Ultra 2SP manual P E N D I X I Specification S, Specifications

A P P E N D I X I – S P E C I F I C A T I O N S
	SPECIFICATIONS
Suspension:	Active-Trac
Drive Wheels:	10 in. (25.4 cm), pneumatic or solid, center-mounted
Caster Wheels:	8 in. (20.32 cm), solid, rear-mounted
Anti-tip Wheels:	5 in. (12.7 cm), solid, front mounted
Maximum Speed:1	Up to 3.6 mph (5.79 km/h)
Range:1,4	Variable up to 12 miles (19 km)
Brakes:	“Intelligent Braking,” electronic regenerative, disc park brake
Ground Clearance:2	See figure 30.
Turning Radius:2	See figure 30.
Overall Size:2	Length: See figure 30.
	Width: See figure 30.
Drivetrain:	Two motor, mid-wheel drive
Batteries:3	Two 12-volt, deep-cycle U-1 batteries
Battery Charger:	Off-board
Weight Capacity:	300 lbs. (136 kg)
	200 lbs. (90.7 kg) with TRU-Balance Power Positioning Systems
	160 lbs. (72.57 kg) with Synergy Manual Tilt
Component Weights:5	Base: 99 lbs. (44.91 kg)
	Batteries: 24.5 lbs. (11.11 kg) each

1

2

Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery condition, motors, controller type, tire type, and tire condition. This specification can be subject to variance of +10%, -5%.

Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or -) 3%.

3AGM or Gel-Cell type required. See VI. “Batteries and Charging”.

4Tested in accordance with ANSI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from theoretical calculation based on battery specifications and drive system performance. Test conducted at maximum weight capacity.

5Battery weight may vary based on manufacturer.

NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 EN12184 stan- dards. All specifications subject to change without notice.

44 www.pridemobility.com Quantum 1103 Ultra