Quantum 1103 Ultra 2SP manual Foot Platform Angle Adjustment, To adjust the foot platform angle

Models: 1103 Series 1103 Ultra 2SP

1 47
Download 47 pages 10.7 Kb
Page 29
Image 29

V . C O M F O R T A D J U S T M E N T S

Foot Platform Angle Adjustment

You can adjust the angle of the foot platform with a hex key. See figure 22.

To adjust the foot platform angle:

1.Flip up the foot platform and locate the setscrew.

2.Turn the setscrew to raise or lower the front of the foot platform.

Anti-Tip Wheels

The anti-tip wheels are designed to give your power chair increased stability on rough surfaces. The anti-tip wheels are preset at the factory for smooth surfaces or indoor use only. If you plan on using your power chair on rough surfaces, it may be necessary to adjust the anti-tip wheels to better suit your needs. The anti-tip wheels may need adjustment if the following occurs:

When coming to a stop, your power chair tips for- ward excessively.

The anti-tip wheels constantly rub the ground.

WARNING! Consult your Quantum Rehab Provider before attempting to change the anti-tip wheel height! Changing the anti-tip wheel height affects handling under acceleration!

WARNING! The higher you raise the anti-tip wheels, the more you increase your power chair’s tendency to tilt forward while decelerating. You can compensate for this by having your Quantum Rehab Provider make a small adjustment to the pre-programmed deceleration setting in the controller or by moving the seat assembly farther to the back of your power chair.

PROHIBITED! Do not remove the anti- tip wheels.

NOTE: Each drive tire must be inflated to the psi/bar/ kPa air pressure rating indicated on the tire for pneu- matic tires. The user must also be seated in the power chair in order to properly adjust the anti-tip wheels.

To adjust the anti-tip wheels:

1.Loosen bolt A. See figure 23.

2.Remove bolt B.

3.Raise or lower the anti-tip wheel bracket. Each hole is in 0.50-in. (1.27-cm) increments.

4.Reinstall bolt B.

5.Tighten bolt A.

6.Raise or lower the other anti-tip wheel so that it is at the same height.

SETSCREW

Figure 22. Bottom View of Foot Platform

ANTI-TIP WHEEL

A

B

Figure 23. Anti-Tip Wheel Assembly

Quantum 1103 Ultra

www.pridemobility.com

29

Page 29
Image 29
Quantum 1103 Ultra 2SP, 1103 Series Foot Platform Angle Adjustment, To adjust the foot platform angle, Anti-Tip Wheels