How to wash
Selection of the desired wash programme
How to wash
EXTRA RINSE
Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on.
The display shows the duration of the programme.
F D C B A
| 95 E |
| 60 |
| 50 |
| 40 |
| 30 |
30 |
|
40 | 60 |
| |
30 | 50 |
40 | |
40 | 40 |
This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water (extra rinse).
The extra rinse is available only with the cotton, synthetics or delicate programme.
Selection of the EXTRA RINSE option
Selection of the desired options
depending on the degree of soil of the laundry. The corresponding light comes on.
Selection of the spin speed or RINSE HOLD option 
It is possible to select a lower spin speed by means of | 1400 | |
the relevant button; the light corresponding to the | 1200 | |
selected speed comes on. |
| 900 |
|
| |
Selecting the option | (RINSE HOLD) the laundry is | 700 |
400 | ||
left immersed in the final rinse water.
If the spin speed is not reduced , the final spin speed will be as follows:
- cottons | 1400 r.p.m. |
- synthetics | 900 r.p.m. |
- delicates | 700 r.p.m. |
- wool | (hand washing) 900 r.p.m. |
Press simultaneously the buttons 
and 
for about 2 seconds: the
light 
comes on in the programme progress display.
This function stays permanently on. To remove it press the buttons 
and 
again until the light 
comes off.
Selection of the DELAY START option
To delay starting of a programme, press the DELAY START button 
before starting the
machine. The figures corresponding to the selected delay will be displayed for about 5 sec-
onds, after which the duration of the selected programme will appear on the display.
If the button 
(SOAK) has been pressed the selected delay will cor- respond to the soak time. If no delay time is selected the soak pro- gramme will last about 30 minutes.
When the START/PAUSE button is pressed, the selected delay will appear again on the display and the machine starts its countdown.
26 | 27 |
