Disposal
Packaging materials
The materials marked with the symbol are recyclable. >PE<=polyethylene
>PS<=polystyrene >PP<=polypropylene
This means that they can be recycled by disposing of them properly in appropriate collection containers.
Machine
Use authorised disposal sites for your old appliance. Help to keep your country tidy!
Tips for environmental protection
To save water, energy and to help protect the environment, we recommend that you follow these tips:
•Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).
•Use the energy saving programme when washing normally soiled garments.
•The machine works more economically if it is fully loaded (for both washing and drying cycles).
•When small loads are washed, use only half to two thirds of the rec- ommended amount of detergent.
•The machine will consume less energy if the laundry is adequately spun before being dried.
•With adequate
•If the water has a medium or high degree of hardness (starting from hardness degree II, see “Detergents and additives”) water softeners must be added.
The amount of detergent can then be adjusted to hardness degree I (= soft).
Main features of your washer-dryer
•Programme and temperature setting using the programme selector.
•Stain programme for effectively treating stained washing.
•Energy saving programme for normally soiled cotton items.
•Speed for the final spin can be reduced to 1200, 900, 700 or 400 rpm.
•RINSE HOLD: the laundry is left immersed in the final rinse water to prevent creasing.
•Delay timer: programme start can be delayed by 1 to 19 hours (e.g. to times with a more economical power rate).
•Programme progress display showing the programme steps selected and the programme phase which is running.
•Because of its gentle washing action, the special wool cycle washes your garments with extreme care.
•The drying programmes will enable you to have dry and soft laun- dry in a short time.
•
•Unbalance detection device: to prevent vibration during spinning.
8 | 9 |