6.Check the water drain hole on the rear wall of the fridge. Clear a blocked drain hole with the aid of the green peg in the pack of accessories included with the appliance.

7.After everything is dry place appliance back into service.

Energy Saving Tips

¥Do not install the appliance near cookers, radiators or other sources of warmth. High ambient temperatures cause longer, more frequent operation of the compressor.

¥Ensure sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance. Never cover air vent ope- nings.

¥Do not place warm foods into the appliance. Allow warm foods to cool first.

¥Only leave door open as long as necessary.

¥Do not set temperature any colder than necessary.

¥Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.

¥Keep the heat emitting condenser, the metall grille on the rear wall of your appliance, always clean.

What to do if ...

Correcting Malfunctions

A malfunction may be caused by only a minor fault that you can rec- tify yourself using the following instructions. Do not perform any other work on the appliance if the following information does not provide assistance in your specific case.

Warning! Repairs to refrigerators/freezers may only be performed by

44

Page 21
Image 21
AEG 290-6I installation instructions Energy Saving Tips, What to do if, Correcting Malfunctions