AEG 290-6I installation instructions Your appliance needs air, Rehingeing the door

Models: 290-6I

1 25
Download 25 pages 17.18 Kb
Page 8
Image 8
Your appliance needs air

If installation next to a source of heat is unavoidable, the following minimum clearances must be maintained at the sides of the applian- ce:

Ðfor electric cookers 3 cm;

Ðfor oil and coal fired ranges 30 cm.

If these clearances cannot be maintained a heat insulating pad is required between the cooker and the refrigeration appliance.

If the refrigeration appliance is installed next to another refrigerator or freezer a clearance of 5 cm at the sides is required, in order to pre- vent the formation of condensation on the outside of the appliance.

Your appliance needs air

For safety reasons, minimum ventilationmust be as shown Fig.

Attention: keep ventilation openings clear of obstruc- tion;

 

 

2

50 mm

min.

200 cm

 

 

 

min.

 

 

cm2 200

D567

 

 

Rehingeing the door

The side at which the door opens can be changed from the right side (factory adjustment) to the left side, if the installation site requires.

Warning! When changing the side at which the door opens, the appliance may not be connected to the mains. Remove plug from the mains beforehand.

31

Page 8
Image 8
AEG 290-6I Your appliance needs air, Rehingeing the door, Attention keep ventilation openings clear of obstruc- tion