AEG 3531 WK-M GB 949600835 manual Units externally measured length, Installation of a single unit

It is not necessary to attach the reinforcement beam to the work top surface, as it is held in place by a specially designed moulding, which is incorporated in the hob units flanges.

The units externally measured length

145mm: Cooker hood

290 mm:

Two-zone ceramic-top electric hob Two-burner gas hob

Grill

Fryer

Wok

580 mm:

Four-zone ceramic-top electric hob Four-burner gas hob

725 mm:

Four-zone ceramic-top electric hob

Installation of a single unit

When mounting a single unit, be it a half-or full size unit, in a worktopsurface which is thicker than 30 mm, it is necessary to make a special notch in both sides of the cut- out hole, as shown in the adjacent drawing.

The purpose of these notches is to create space for the electrical cables.

16