Operating Instructions
Prior to using for the first time
Prior to using for the first time, remove all the clips with which the dish racks are secured for transport.
Then perform the following steps: 0 1. Adjust the water softener
2.Fill with Salt for the Water Softener
3.Fill with Rinse Aid
Adjusting the Water Softener
| To prevent the build up of scale on dishes and in the dishwasher, the |
| dishes must be washed with soft, i.e. low lime content water. For this |
| reason the dishwasher is fitted with a water softener in which tap |
| water from a hardness of 4 °d (German degree) is softened with the aid |
| of special salt. |
3 | Your local water authority can advise you on the hardness of the water |
| in your area. |
0Adjust the water softener as stated in the table to the setting that cor- responds to the hardness of the water in your area. The water softener can be set manually using the water hardness switch and also electron- ically using the buttons on the control panel.
| Water Hardness |
| Hardness Setting | Display in the | |||
|
|
|
|
|
|
| |
in °d1) |
| in ppm2) | Range | Manual | Electronic | ||
|
| ||||||
51 - 70 |
| 9,0 - 12,5 |
|
|
| 9 | H 9 |
|
|
|
| ||||
43 - 50 |
| 7,6 - 8,9 |
|
|
| 8 | H 8 |
37 - 42 |
| 6,5 - 7,5 |
| IV | 1 | 7 | H 7 |
29 - 36 |
| 5,1 - 6,4 |
|
|
| 6 | H 6 |
23 - 28 |
| 4,0 - 5,0 |
|
|
| 5 | H 5 |
19 - 22 |
| 3,3 - 3,9 |
| III |
| 4 | H 4 |
15 - 18 |
| 2,6 - 3,2 |
|
| 3* | H 3 | |
|
|
|
| ||||
|
|
|
|
|
|
|
|
11 - 14 |
| 1,9 - 2,5 |
| II | 0* | 2 | H 2 |
4 - 10 |
| 0,7 - 1,8 |
| I/II | 1 | H 1 | |
|
|
| |||||
|
|
|
|
|
| 0 |
|
under 4 |
| under 0.7 |
| I |
| no salt | H 0 |
|
|
|
|
|
| necessary |
|
|
|
|
|
|
|
|
|
10
