AEG 3A manual Filling with Salt for the Water Softener, Fill with dishwasher salt

Models: 3A

1 40
Download 40 pages 63.32 Kb
Page 12
Image 12
Filling with Salt for the Water Softener

Operating Instructions

Filling with Salt for the Water Softener

1

Use only salt designed for dishwashers. Never fill the salt container

 

with any another type of salt (e.g. culinary salt) or dishwasher deter-

gent as this would irreparably damage the water softener.

Prior to filling with salt, please check each time that you really do have a packet of dishwasher salt in your hand.

Fill with dishwasher salt:

Prior to using the dishwasher for the first time

When the SALT indicator J on the control panel is illuminated.

3

If the water hardness in your area is less than 4 °d, you do not need to

 

use dishwasher salt. The SALT indicator J on the control panel will

 

remain illuminated.

 

 

0 1.

Open the door, remove the lower

 

 

 

 

 

 

 

rack.

SALE

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

Undo the lid on the salt container by

SALT

 

 

 

 

SALZ

 

 

 

 

 

turning it anticlockwise.

SEL

 

 

 

 

3.When using for the first time: fill the salt container with water.

4.Place the funnel supplied on the con-Fill with dishwasher salt:

tainer opening.

Fill the container with salt through Manual backgroundManual backgroundManual background

the funnel; the capacity of the con-Manual backgroundManual background tainer is approx. 1.0-1.5 kg depend- Manual background ing on the grain size. Do not overfill

the salt container with salt.

3

The water expelled by filling the salt container with salt runs out of the

 

salt container onto the base of the washing compartment. This is not a

cause for concern, the water will be pumped out at the start of the next wash programme.

5.Clean any salt remnants on the container opening.

6.Turn the lid clockwise to the stop, otherwise dishwasher salt will leak into the wash water, this could lead to poor wash results. To avoid this run a rinse programme after filling the salt container with special salt. This will wash away salt water and any salt crystals that have been spilt.

3

Depending on the size of the salt grains, it can take several hours for

 

the salt to dissolve in the water and the special salt indicator J to

extinguish. The setting of the water softener and the consumption of salt are dependent on the hardness of the local water.

12

Page 12
Image 12
AEG 3A manual Filling with Salt for the Water Softener, Fill with dishwasher salt