DROP DOWN TOP ELEMENT
The removal of a single screw at the front of the upper grill element allows the grill to drop down to facilitate the cleaning of the oven ceiling. On completion of cleaning, simply replace the grill element and secure with the screw.
To avoid smoking, use a clean, damp cloth to regularly clean oil and fat splatters from
the exposed drop down grilling element.The fan cover can be lifted out for cleaning separately by removing the retaining screws. The fan blade can also be removed for cleaning if necessary.
NOTE: that the fan blade nut has a
O - Trouble shooting guide
Symptom | Remedy |
No power supplied to appliance | Has the power been disconnected? Check the meter |
| box. Has the main fuse or circuit breaker blown or |
| tripped? |
Oven power is on but appliance does not | Oven may be set on AUTO (see auto programmed |
operate | cooking) |
Oven power is on but there is no heat | Oven may be set on AUTO |
| Oven temperature may be set OFF |
| Mode may be on incorrect selection |
Rubber seal has gap/s at bottom and | Correct - doors are sealed this way for oven venting |
ends do not meet | purposes |
|
|
Display is flashing, is only part | Turn power supply to appliance off, wait 30 seconds and |
illuminated or is cycling through various | turn power on. Reset clock |
displays. |
|
|
|
28