AEG 4006G-M user manual F - Electronic Programmer Operation, Cooling Fan, Safety Thermostat

Models: 4006G-M

1 31
Download 31 pages 59.72 Kb
Page 11
Image 11
Cooling Fan

Cooling Fan

The range is provided with a cooling fan motor to reduce the heat around the oven. The fan motor is controlled by a sensor, which will start when the temperature achieves the level pre-fixed and stop working when the temperature is reduced accordingly.

This safeguards both the oven and the adjoining cabinets from the possibility of temperature damage.

Safety Thermostat

Your oven is fitted with an over temperature sensor that will automatically shut down your oven for a period if it is deemed to be overheating- this sensor is fitted to the rear wall of the oven, inside the outer case – it will only activate in extreme circumstances and is provided as protection to the appliance and the adjoining furnishings. If activated it will shut down the appliance for a short time and will automatically reset allowing normal operations – you should consult your service technician if the problem re-occurs.

F - Electronic Programmer Operation

The 24 hour clock allows the setting of automatic cooking options up to 24 hours in advance.

1- Minus Time Button

2Mode (Countdown Timer with Alarm, Cooking duration, Finish Cooking)

3+ Plus Time Button

Setting the time on the 24 hour clock

Safety Thermostat IMPORTANT – NOTE FOR NEW INSTALLATION AND FIRST OPERATION

1- The clock will require setting when you first turn on the power (or following a power failure).

2- At power on, the relay contact is opened. The display and AUTO symbol flashes and time of day starts from 0:00.

11

Page 11
Image 11
AEG 4006G-M F - Electronic Programmer Operation, Cooling Fan, Safety Thermostat, Setting the time on the 24 hour clock