16Multitab function
4. If you use detergent tablets, put the de- tergent tablet in the detergent dispenser
(A).
5. Close the lid of the detergent dispenser. Press the lid until it locks into position.
Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programmes. Use long washing pro- grammes when you use detergent tablets to fully remove the detergent.
MULTITAB FUNCTION
The multitab function is for combi detergent tablets.
These tablets contain agents such as detergent, rinse aid and dishwasher salt. Some types of tablets can contain other agents.
Do a check if these tablets are applicable for the local water hardness. Refer to the in- structions from the manufacturer.
When you set the multitab function, it stays on until you deactivate it.
The multitab function stops automatically the flow of rinse aid and salt. The rinse aid indicator light and salt indicator light are deactivated.
The programme duration can increase if you use the multitab function.
Activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the multitab function when the programme operates. Cancel the washing programme, then set the programme again.
To activate the multitab function:
•Press the multitab button. The multitab indicator light comes on. To deactivate the multitab function:
•Press the multitab button. The multitab indicator light goes off.
Do these steps if the drying results are not satisfactory:
1.Fill the rinse aid dispenser with rinse aid.
2.Activate the rinse aid dispenser.
3.Set the rinse aid dosage to position 2.
•You can only activate or deactivate the rinse aid dispenser when the multitab function is activated.
To activate/deactivate the rinse aid dispenser:
