What to do if… 21
3. To unlock the filter system, turn the han- dle on the microfilter (B) approximately 1/4 anticlockwise.
4.Remove the filter system.
5. Hold the coarse filter (A) by the handle with the hole.
6.Remove the coarse filter (A) from the
microfilter (B).
7.Remove the flat filter (C) from the bot-
tom of the appliance.
8.Clean the filters below running water.
9. Put the flat filter (C) in the bottom of the appliance.
10. Put the coarse filter (A) in the microfilter
(B) and push the filters together.
11. Put the filter system in position.
12.To lock the filter system, turn the handle on the microfilter (B) clockwise until it lock in position.
13.Install the lower basket.
14.Close the door.
Do not remove the spray arms.
If the holes in the spray arms become clogged, remove remaining parts of soil with a cocktail stick.
External cleaning
Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only use neutral detergents. Do not use abrasive products, scouring pads or solvents (acetone, trichloroethylene etc...).
Frost precautions
CAUTION!
Do not install the appliance where the temperature is below 0 °C. The manufacturer is not responsible for damage because of frost.
If not possible, empty the appliance and close the door. Disconnect the water inlet hose and remove water from the water inlet hose.
