20Care and cleaning
Standby mode
If you do not switch off the appliance at the end of the washing programme, the appliance automatically goes into standby mode. The standby mode decreases energy consumption. Three minutes after the end of the programme, all indicator lights go off and the digital display shows one horizontal bar.
Press a button to go back to the
Removing the load
•First remove items from the lower basket, then from the upper basket.
•There can be water on the sides and door of the appliance. Stainless steel becomes cool more quickly than the dishes.
CARE AND CLEANING
WARNING!
Switch the appliance off before you clean the filters.
Cleaning the filters
CAUTION!
Do not use the appliance without the filters. Make sure that the installation of the filters is correct. Incorrect installation will cause unsatisfactory washing results and damage to the appliance.
If necessary, clean the filters. Dirty filters decrease the washing results.
The dishwasher has three filters:
1.coarse filter (A)
2.microfilter (B)
3. | flat filter (C) |
| |
Do these steps to clean the filters: | A | ||
1. | Open the door. | ||
| |||
2. | Remove the lower basket. |
| |
|
| B | |
|
| C | |
