Technical data 23
Product number : ..........
Serial number : ..........
The cleaning results are not satisfactory
The dishes are not clean
Limescales particles on the dishes
The dishes are wet and dull
There are streaks, milky spots or a bluish coating on glasses and dishes
Dry water drop signs on glasses and dishes
•The selected washing programme is not applicable for the type of load and soil.
•The baskets are loaded incorrectly so that water cannot reach all surfaces.
•Spray arms do not turn freely because of incorrect arrangement of the load.
•The filters are dirty or not correctly installed.
•The quantity of detergent is too little or missing.
•The salt container is empty.
•The water softener is adjusted on a wrong level.
•The salt container cap is not closed correctly.
•No rinse aid has been used.
•The rinse aid dispenser is empty.
•Decrease the rinse aid dosage.
•Increase rinse aid dosage.
•The detergent can be the cause.
TECHNICAL DATA
Dimensions | Width cm |
|
| 59,6 |
|
|
|
|
|
| Height cm |
|
| 85 |
|
|
|
|
|
| Depth cm |
|
| 62,5 |
|
| |||
Electrical connection - Voltage | Information on the electrical connection is given on the rating | |||
- Overall power - Fuse | plate on the inner edge of the dishwasher door. |
| ||
|
|
|
|
|
Water supply pressure | Minimum |
| 0,5 bar (0,05 | MPa) |
|
|
|
|
|
| Maximum |
| 8 bar (0,8 | MPa) |
Capacity | Place settings |
|
| 12 |
|
|
|
|
|
INSTALLATION INSTRUCTIONS
INSTALLATION
Fitting under a counter
WARNING!
Make sure that the mains plug is disconnected from the mains socket during installation.
