User information
Symptom | Cause | |
|
|
|
|
|
|
The washing cycle is much | • | the water inlet is blocked, |
too long | • | there was a power supply failure or the |
|
| water was cut off, |
| • | the motor temperature safety device |
|
| tripped, |
| • | the water inlet temperature is lower |
|
| than normal, |
| • the foam detection safety system trip- | |
|
| ped (too much detergent) and the |
|
| washing machine evacuated the foam, |
| • the | |
|
| tripped, an additional phase was |
|
| added to distribute the washing in the |
|
| drum better. |
The «End» light** flashes 4 | • | the cover is not correctly closed. |
times and the error code |
|
|
E40 appears in the display |
|
|
window |
|
|
The «End» light** flashes 2 | • | the drain filter is blocked, |
times and the error code | • | the drain pipe is blocked or kinked, |
E20 appears in the display | • | the drain pipe is too high (see «instal- |
window |
| lation»), |
| • the drain pump is blocked, | |
| • the installation siphon is blocked. | |
The «End» light** flashes 1 | • | the water tap is closed, |
time and the error code | • | the water network has been cut off. |
E10 appears in the display |
|
|
window |
|
|
The «End» light** flashes 10 | • | the flaps of the drum door are opened. |
times and the error code |
|
|
EA0 appears in the display |
|
|
window |
|
|
|
|
|
28
