User information
33
Leveling
Precise leveling will prevent vibrations, noise and movements of the
washing machine during operation.
Make the washing machine level by adjusting
the leveling screw that is too short.
Unscrew the stand and locking collar assembly
(lift the washing machine if necessary).
When the washing machine is stable, maintain
the stand on the ground and turn the locking
collar as far as possible.
Water inlet
The «aqua-stop» is a measure of protection
against the damages caused by the water.
Indeed, the water inlet worns away by time and
it can so deteriorate. In this case, the «aqua-
stop» prevents the water from going into the
appliance.
The problem is indicated by the appearance of
a red mark in the window «A». Close the water
inlet tap and call the After Sales Service.
Screw the supply pipe connector onto the water inlet tap (20x27
mm).
Open the water inlet tap.
You cannot prolong the water inlet pipe. If it is too short, call the
After Sales Service.