AEG 47380 manual Operating problems

User information

Operating problems

Many checks have been carried out during the manufacture of your washing machine. However, if you face a problem with its operation, please read the following sections before calling the After Sales service.

Symptom	Cause
The washing machine will	•	the washing machine is not correctly
not start or will not fill		connected, the electrical installation is
		not working,
	•	the cover of your washing machine
		and the drum flaps are not correctly
		closed,
	• you did not control the program start
		correctly,
	• there is a power failure,
	• the water supply is closed off,
	• the water tap is closed,
	• the water inlet is blocked.
The washing machine fills	•	the drain siphon is attached too low
up but empties again		(see installation section).
immediately
The washing machine will	• the drain pipe is blocked or kinked,
not spin or will not empty	• the drain filter is blocked,
	• the anti-unbalance mass safety device
		has tripped; bad distribution of
		washing in the drum,
	• the «Drain» program or the «Rinse hold»
		option is selected,
	• the height of the drain siphon is
		wrong.

26