Malfunction |
| Possible cause |
|
|
|
|
| The plug is not properly |
....the programme does not |
| inserted in the power |
start |
| socket. |
|
|
|
|
|
|
|
| There is no current at the |
|
| socket. |
|
|
|
|
| The door is not properly |
|
| closed. |
|
|
|
|
| Dishes are rattling against |
....the machine is noisy |
| each other. |
| The spray arms are | |
|
| |
|
| knocking against the |
|
| dishes. |
|
|
|
|
|
|
....the door is difficult to |
| The dishwasher is not level |
close |
| or not properly |
|
|
|
Remedy
Insert the plug.
Close the door.
Load correctly crockery, cutlery. pots and pans. Refer to Loading cutlery and dishes.
Refer to Installation instructions.
30
...the wash results are not satisfactory
Visible lime deposits or white film on the dishes
●Check that the right level of the water softener is setted.
●Check that there is salt.
The dishes are not quite dry
●The rinse aid has run out or too little is being used.
The dishes are not clean
●The baskets are too full.
●The dishes have not been arranged properly.
●The spray arms do not rotate because incorrect loading of the baskets.
●The filters are clogged.
●The filters are not in the correct position.
●Not enough detergent has been used or it is unsuitable.
●The detergent is old or has gone hard.
●The salt container cap is not properly closed.
●The washing programme is too gentle.
