What to do, if...
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer.
The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems.
The dishwasher will not start or stops during operation. All push buttons are inoperative except for the On/Off push button. The indicator light of the programme under and one or more of the phase indicator lights (Washing, Drying, End of programme) are flashing.
Press the On/Off push button to switch off the dishwasher and carry out the following suggested corrective actions listed below.
Fault code
...."washing" phase
indicator light is flashing
Possible cause |
| Remedy |
|
|
|
The water tap is closed. |
| Open the water tap. |
|
|
|
The mains water supply has |
|
|
been cut off. |
|
|
|
|
|
...."drying" phase indicator
light is flashing
...."washing" and "drying"
phase indicator lights are flashing
....one or more phase
indicator lights are flashing
The inlet hose may be squashed or bent.
The drain hose may be squashed or bent. The drain hose extension is not correct.
The sink may be blocked.
Protection against flooding is active.
General
Reposition correctly the hose.
Reposition correctly the drain hose. Follow the instructions for connecting to the waste.
Clear any blockages.
Close the water tap and contact the Service Force Centre.
Switch off the dishwasher. Switch it back on and start the programme.
if the alarm reappears, call the Service Force Centre.
Once the checks have been carried out switch on the dishwasher and start a washing programme, if the fault code reappears in the digital display, contact your local Service Force Centre.
29
