AEG 54840 manual Select the Extra Quick option, Select the «Start/Pause», Select the Delay Start

Models: 54840

1 44
Download 44 pages 35.27 Kb
Page 14
Image 14

14Use

Select the Extra Quick option

By pressing «SUPERSNEL RAPIDE» (Extra quick) button, the washing duration will be reduced by few minutes.

The corresponding pilot light illuminates.

This option is suitable for items that have been used or worn for a short time.

With this option selected, the max recommended load for cottons is 3 kg and 1.5 for synthetics.

1400

 

900

 

700

 

CENTRIFUG.

VLEKKEN

ESSORAGE

TACHES

SUPERSNEL RAPIDE

Select the «Start/Pause»

To start the selected programme, press the «START/PAUZE DEPART/PAUSE» (Start/Pause) button; the corresponding red pilot light stops flashing.

The «HOOFDWAS LAVAGE» (Functioning) pilot light is on to indicate that the appliance starts operating and the door is locked.

To interrupt a programme which is running, press the Start/Pause button: the corresponding red pilot light starts to flash.

To restart the programme from the point at which it was interrupted, press the Start/Pause button again.

HOOFDWAS LAVAGE

EINDE FIN DE CYCLE

SPOELEN

RINCAGE

START/PAUZE DEPART/PAUSE

If you have chosen a delayed start, the machine will begin the countdown.

Select the Delay Start

This button makes it possible to delay the starting of the washing programme by 3, 6, and 12 hours.

Before you start the programme, if you wish to delay the start, press the «STARTUITSTEL DEPART DIFFERE» (Delay Start) button repeatedly, to select the desired delay. The relevant light illuminates.

You must select this option after you have set the programme and before you press the Start/Pause button.

 

 

 

STARTUITSTEL

3h

6h

12h

DEPART DIFFERE

 

You can cancel the delay time at any moment, before you press the Start/Pause button. If the Start/Pause button has already been pressed:

set the washing machine to PAUSE by pressing the Start/Pause button;

Page 14
Image 14
AEG 54840 manual Select the Extra Quick option, Select the «Start/Pause», Select the Delay Start