36Installation

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

1.After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom.

HEC0008

2.Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance.

HEC0030

3. Unscrew the three bolts with the supplied

spanner

HEC0036

4. Slide out the relevant plastic spacers.

HEC0037

Page 36
Image 36
AEG 54840 manual Installation, Unpacking, Unscrew the three bolts with the supplied, Spanner