AEG 60810 manual Programme progress, Interrupting a programme/Adding washing

Programme progress

•The programme progress display shows the programme step that is currently being carried out.

– (Prewash)

– (Main wash)

– (Rinse)

– (Extra Rinse)

– (Spin)

– (End)

•The multi-display shows the estimated time remaining (in hours and minutes) until the end of the programme.

3 The remaining programme time may increase or briefly remain constant during the wash programme as the programme adjusts to various con- ditions while washing (e. g. type of washing, amount of washing, rec- ognising out-of-balance when spinning, special rinse cycle, etc.).

Interrupting a programme/Adding washing

Interrupting a programme

•A washing programme can be interrupted at any time by pressing the

button (START/PAUSE) and then re-started by pressing the

button (START/PAUSE) again.

•To stop the washing machine before the programme has ended, turn the programme knob to (OFF). Important: Be careful if there is water in the appliance!

Adding washing

It is possible to add washing, as long as the (DOOR) light is lit green.

1.Press the button (START/PAUSE). The door can be opened.

2.Close the door and press the button (START/PAUSE) again. The programme will continue.

15