End of the wash cycle/Removing the washing

When the programme has finished, (END) will illuminate on the pro- gramme progress display. The door can be opened as soon as the in- dicator (DOOR) is lit green.

1.Open the door and remove the washing.

2.Turn the programme knob to (OFF).

3.When you have finished washing, pull out the detergent drawer a little to let it to dry out. Keep the door very slightly open so that the washing machine can air.

If (RINSE HOLD) has been selected:

Following a rinse hold (END) will be lit on the programme progress display.

The water must first be drained off:

Either turn the programme knob to (OFF), then to (DRAIN) and

press the button (START/PAUSE) (the water will be drained without spinning),

turn the programme knob to (OFF) and then to (SPIN). Change

the spin speed, if necessary, and press the button (START/ PAUSE) (the water will be drained and the washing spun).

16

Page 16
Image 16
AEG 60810 manual End of the wash cycle/Removing the washing, If Rinse Hold has been selected