Activating rinse aid inflow when 3in1 function is selected

3 If the 3in1 function is not selected, the rinse aid inflow is always acti- vated.

If the 3in1 function is selected due to the use of 3in1 detergent, the rinse aid inflow is deactivated. If the dishes then do not dry sufficiently, you should re-activate the rinse aid inflow (see also section “Using 3in1 detergents”).

1.Press the ON/OFF button.

3 If the LED indicator of only one programme button is illuminated, this wash programme has been activated. The wash programme must be deselected:

Press function buttons 1 and 2 simultaneously for approx. 2 seconds. The LED indicators of all the programme buttons that can be selected will illuminate.

2.Press function buttons 1 and 2 simultaneously and hold them down. The LED indicators for function buttons 1 to 3 will flash.

3.Press function button 2.

The LED indicator for function button 2 will flash. The multi-display will indicate the current setting:

0d

Rinse aid inflow deactivated when 3in1 on (factory setting)

1d

Rinse aid inflow activated when 3in1 on

 

 

4.Pressing function button 2 activates and deactivates the rinse aid dis- pensing function.

5.Once the multi-display is indicating the required setting, press the ON/ OFF button. The setting is now saved.

13