Setting electronically:
1.Press the ON/OFF button.
3 If the LED indicator of only one programme button is illuminated, this wash programme has been activated. The wash programme must be deselected:
Press function buttons 1 and 2 simultaneously for approx. 2 seconds. The LED indicators of all the programme buttons that can be selected will illuminate.
2.Press function buttons 1 and 2 simultaneously and hold them down. The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 1.
The LED indicator for function button 1 will flash. The
4.Pressing function button 1 increases the hardness setting by 1. (Exception: hardness setting 1 follows hardness setting 10).
5.When the hardness setting is correct, press the ON/OFF button. The hardness setting is now saved.
If the water softener is set electronically to “1”, this switches off the control indicator for dishwasher salt.
| Water hardness |
| Adjusting the hardness | Indication on | ||||
|
|
| setting | |||||
|
|
|
|
|
| the | ||
|
|
|
|
|
|
|
| |
in °d1) |
| in mmol/l2) | Range | Manual |
| Electronic | play | |
51 - 70 |
| 9,0 - 12,5 |
|
|
|
| 103) | 10L . |
43 - 50 |
| 7,6 - 8,9 |
|
|
|
| 9 | 9L |
37 - 42 |
| 6,5 - 7,5 |
| IV | 1 |
| 8 | 8L |
29 - 36 |
| 5,1 - 6,4 |
|
|
|
| 7 | 7L |
23 - 28 |
| 4,0 - 5,0 |
|
|
|
| 6 | 6L |
19 - 22 |
| 3,3 - 3,9 |
| III |
|
| 5 | 5L |
15 - 18 |
| 2,6 - 3,2 |
|
|
| 4* | 4L | |
|
|
|
|
| ||||
11 - 14 |
| 1,9 - 2,5 |
| II | 0* |
| 3 | 3L |
|
|
|
|
|
|
|
| |
4 - 10 |
| 0,7 - 1,8 |
| I/II |
| 2 | 2L | |
|
|
|
| |||||
|
|
|
|
|
|
| 1 |
|
below 4 |
| below 0.7 | I |
|
| no salt | 1L | |
|
|
|
|
|
|
| necessary |
|
|
|
|
|
|
|
|
|
|
1)(°d) German degree, measure of the hardness of water
2)[mmol/l] millimol per litre, international unit for water hardness
3)On this setting the length of the dishwashing cycle may be slightly longer. *) factory setting
9