Installation, Unpacking, Six smaller bolts C

HEC0001

HEC0003S C

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

After removing all the packaging, carefully lay machine on it’s back to remove the poly- styrene base from the bottom.

Remove the pow- er supply cable and the draining hose from the hose holders on the rear of the appliance.

With a suitable spanner, supplied with the machine unscrew and remove the central rear bolt A. Slide out the relevant plastic spacer.

Unscrew and remove the two large rear bolts B

and the six smaller bolts C.

B B

HEC0008

HEC0002S

HEC0011S

Remove the bracket D. Tighten up the six smaller bolts C.

HEC0014 C

Page 40

Image 40

AEG 62895, 60895 Installation, Unpacking, Six smaller bolts C, Remove the bracket D. Tighten up the six smaller bolts C

Contents

Lavamat L 60895 Dear customer Contents Programme charts wash and special programmes Page Safety instructions General safetyPositioning, connection, starting up Follow the instructions for positioning and connection Child safety Proper use Disposal Tips for environmental protectionPackaging materials Machine Main features of your washing machine Description of the appliance Front view Control panel Programme selector dial Delay Start button Preselección START/PAUSE button START/PAUSA Programme Option buttons To be used for heavily soiled laundry Display Tiempo Programme progress display Cancelling a programme Altering a programme which is runningAltering an option which is running Opening the door after the programme has started Detergent dispenser drawer Before the first wash Preparing the wash cycle Sorting out and preparing the laundry Weight of laundry Sort of laundry Approximate Dry weightsTypes of fabric and care labels Cotton Delicates Detergents and additives Load the laundry How to washAdd detergent and additives Select the desired options Select the desired wash programmeSelect the spin speed or Rinse Hold option Select the Delay Start option Selection of the Extra Rinse option Starting the programme Display At the end of the programme Wash programmes for cottons Programme chart40-30 Wash Temp Fabrics Additional Max Consumption Functions Consumption Energy Tion Special programmesKWh Water lt Cleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawer Door seal Drain pump Emergency emptying out Water inlet filterScrew the pump fully Close the pump door Frost precautions Problem Possible cause Solution TroubleshootingSomething not working? Problem Possible cause Solution Problem Possible cause Distributed Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundry Water pressure 05 0.8 MPa Technical dataThis appliance complies with the following EC directives Service Instructions for installation and electrical connection Safety instructions for the installer Installation UnpackingSix smaller bolts C Remove the bracket D. Tighten up the six smaller bolts C Positioning Fill the smaller Water inlet LevellingMPa 0.5 bar is required for safe operation of the appliance Water drainage End of the drain hose can be positioned in three ways Permanent connection Electrical connectionConnect the machine to an earthed socket Page Salvo modificaciones From the Electrolux Group. The world’s No choice

AEG 62895, 60895 manual Installation, Unpacking, Six smaller bolts C

Models: 60895 62895

Installation

Unpacking

and the six smaller bolts C.

Remove the bracket D. Tighten up the six smaller bolts C.