12 www.aeg.com
STARTING A PROGRAMME
•clean the filter
•drain the water container
(See chapter CARE AND CLEANING.)
To activate the programme push the Start/Pause button. The LED above the push button changes the color to red.
CHANGE A PROGRAMME
To change a programme, turn the pro- gramme selector to Stop and then set the programme again.
CHILD LOCK FUNCTION
The child lock can be set to prevent the children to play with the appliance. The child lock function locks all push buttons and the programme dial (this function does not lock On/Off button). To activate the child lock function push the Anti- crease and Delay Start buttons at the
same time until the symbol 
come into view on the display. To deactivate push again the above buttons until the symbol go out of view.
You can activate the child lock function:
•before you push the Start/Pause button - the appliance cannot start
•after you push the Start/Pause button - all the push buttons and the pro- gramme dial are deactivated
AT THE END OF PROGRAMME
When the drying cycle is completed, the
symbol flashes on the display. If the Buzzer function is on, an acoustic signal sounds intermittently for one minute. To remove the laundry:
1.Push the On/Off button for 2 seconds to deactivate the appliance.
2.Open the appliance door.
3.Remove the laundry.
4.Close the appliance door.
After each drying cycle:
