ENGLISH 11

CAUTION!

Do not lock the laundry in be- tween the appliance door and rubber seal.

SWITCHING ON THE

APPLIANCE

Push the On/Off button to activate or to deactivate the appliance. When the appli- ance is on, some indications come in to the view on the display.

AUTO STAND-BY FUNCTION

To decrease the energy consumption, the automatic stand-by function deactivates the appliance:

if the Start/Pause button was not push- ed in the time of 5 minutes.

after 5 minutes from the programme end.

Push the On/Off button to activate the appliance.

SETTING A PROGRAMME

Use the programme dial to set the pro- gramme. The possible time to complete the programme come into view on the display.

The drying time you see is related to the load of 5 kg for cotton and jeans programmes. For the other programmes the drying time is re- lated to the recommended loads. The drying time of the cotton and jeans programmes with the load more than 5 kg is longer.

SPECIAL FUNCTIONS

Together with the programme you can set 1 or more special functions.

To activate or deactivate the function push the applicable push button.

When the function is activated the LED above the push button comes into the view.

THE DELICATE FUNCTION

To dry more lightly the sensitive and tem- perature sensitive textiles (e.g. acrylic, vis-

cose). For fabrics with the symbol on the fabric label. Programme operates with decreased heat.

THE BUZZER FUNCTION

When the buzzer function is activated you can hear the buzzer at the:

cycle end

anti-crease phase start and end

cycle interruption

The buzzer function is by default always on. You can use this function to activate or deactivate the sound.

THE ANTICREASE FUNCTION

Extends anticrease phase (30 minutes) at the end of the drying cycle to 90 minutes. This function prevents laundry from crea- ses. Laundry can be removed during the anticrease phase.

THE DELAY START FUNCTION

Let to delay the start of a drying programme from minimum of 30 minutes to maximum of 20 hours.

1.Set the drying programme and func- tions.

2.Push the Delay start button again and again until the necessary time of the

delay come into the view on the dis-

play (e.g. if the programme has to start after 12 hours.)

3.To activate the Delay start function, push the Start/Pause button. The time to start decreases on the display.

Page 11
Image 11
AEG 65270AC EN Switching on Appliance, Auto STAND-BY Function, Setting a Programme, Special Functions, Delicate Function