Installation and connection instructions
Compensate for floor unevenness
Floor unevenness can be compensated for and the height can be cor- rected with the four adjustable screw feet. The height can be adjusted in the range +10 ..
To adjust the feet use the special spanner supplied for removing the transport braces.
01. Slide the special key firmly onto the hexagon head of the threa-
ded foot as far as it will go.
2. Adjust the screw feet so that the unit is horizontal and stable. The
unit must not wobble over when loaded.
3. If necessary, check the setting
with a spirit level.
Important! Minor unevenness of the floor surface should never be levelled out by laying pieces of
wood, card or similar materials, but rather should always be com-
pensated for by adjusting the adjustable feet.
44
