
Operating Instructions
What to do if...
Remedying faults
In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you use the Customer Service to rem- edy one of the faults listed here or to remedy an operating fault, the customer service technician's visit will be subject to a charge, even dur- ing the warranty period.
• If the fault code E10, E20 or E40 is shown in the multi display, you may be able to remedy the fault yourself (see the Faults table below). After
remedying the fault, press the O/s (START/PAUSE) button. If the fault code is displayed again, inform the Customer Service.
•In the case of all other displayed faults (E and number or letter), please inform the Customer Service, stating the fault code.
Problem | Possible Cause | Remedy | |
| The mains plug is not | Plug in the mains plug. | |
| plugged in. | ||
|
| ||
| The fuse of the building's | Replace the fuse. | |
| wiring is not in order. | ||
The washing machine |
| ||
The filling door is not cor- | Close the filling door; The | ||
does not work. | |||
| rectly closed. | lock must engage audibly. | |
| O/s (START/PAUSE) but- | Press the O/s (START/ | |
| PAUSE) button until the pro- | ||
| ton not pressed long enough. | ||
| gram begins. | ||
|
|
| |
Filling door cannot be |
| Cancel the child safety fea- | |
The child safety feature is set | ture (see Section "Child | ||
closed. | |||
| Safety Feature“). | ||
|
| ||
The fault code E40 ap- |
| Close the filling door cor- | |
pears. The display | The filling door is not cor- | ||
rectly. | |||
l(MAIN WASH) | rectly closed. | ||
Restart the program. | |||
flashes. |
| ||
|
| ||
|
|
|
31