Rinse+ Spülen+ | AEG 74740 manual

			Instructions for use

	Problem	Possible Cause	Remedy
		Water valve is closed.	Open the water valve.
	No water runs in.		Close the water valve. Un-
	No water runs in.		screw the hose from the wa-
	Fault code E10 ap-	Filter in screw connection of	screw the hose from the wa-
	Fault code E10 ap-	Filter in screw connection of	ter valve, remove the filter
	pears. The indicator	the intake hose is blocked.	ter valve, remove the filter
	pears. The indicator	the intake hose is blocked.	and clean it under running
	RINSE+ (SPÜLEN+,		and clean it under running
	RINSE+ (SPÜLEN+,		water.
	RINCAGE+) flashes.		water.
	RINCAGE+) flashes.
		Water tap is blocked with	Check water tap and have it
		limescale or is faulty.	repaired if necessary.
			Remove transport safeguard
		The transport safeguard has	as indicated in the instruc-
		not been removed.	tions for installation and
			connection.
		The height-adjustable screw	Adjust in accordance with
		The height-adjustable screw	the installation and connec-
		feet are not correctly set.	the installation and connec-
		feet are not correctly set.	tion instructions.
	The washing machine		tion instructions.
	The washing machine	There is not much washing in
	vibrates during opera-	There is not much washing in	This does not impair the op-
	tion or it is on an une-	the drum (e.g. only one	This does not impair the op-
	tion or it is on an une-	the drum (e.g. only one	eration of the machine.
	ven surface.	dressing gown).	eration of the machine.
	ven surface.	dressing gown).
		The water could not be com-	Check the laying of the
		The water could not be com-	drainage hose and eliminate
		pletely pumped off before	the bend if necessary, or
		spinning because the drain-	the bend if necessary, or
		spinning because the drain-	clean the solution pump and,
		age hose is bent	clean the solution pump and,
		age hose is bent	if required, remove foreign
		or	if required, remove foreign
		or	bodies from the pump hous-
		the solution pump is blocked.	bodies from the pump hous-
		the solution pump is blocked.	ing.
	The washing solution	Too much detergent was	Meter the detergent exactly
	of the main wash	Too much detergent was	in accordance with the
	of the main wash	probably used.	in accordance with the
	froths up a lot.	probably used.	manufacturer's information.
	froths up a lot.		manufacturer's information.

35

Image 35

AEG 74740 manual Rinse+ Spülen+

Contents

ÖKO-LAVAMAT 74740 update Practical use of the unit Dear customerPlease read this user information carefully To any subsequent owners of the unit Contents What to do if Remedying FaultsPage Correct Use SafetyBefore Putting into Operation for the First Time General Safety Child Safety For polyoxymethylene, e.g. plastic clips DisposalEnvironment Tips Dispose the packing material Drawer for Washing Powder and Care Agent Unit DescriptionFront View Program Selector Control Panel Wool WOLLE, LAINE/ P Handwash Shorter washing cycle for slightly dirty washing Come effective at higher temperaturesAdditional Program Buttons Minutes. This is followed automatically by the main wash Consumption Values and Time Requirements Water Protection Aqua Control What Does Update Mean? Sort and Prepare the Washing Before the First WashPrepare the Washing Cycle Washing Types and Care Codes Water Softener How much washing detergent and care agent? After the Washing Program Ends Run a Washing CycleBrief Instructions Tables Setting the Washing Program Per minute Change Spin Speed / Select Rinse HoldRevolutions Soaking Duration Set the Delay Timer/Soaking Duration Add the Washing Opening and Closing the Filling Door Or for water softener If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Compartment for pre-wash agent/soaking agent If the time preselection is set Start the Washing ProgramIs pressed Multidisplay Completion of the Washing ProgramProgram sequence display Change the Spin Speed Changing a Washing ProgramChanging or aborting a program Select the Additional Program Washing Cycle Ended/Remove Washing Washing Program Tables Type Separate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Washing Detergent Drawer Cleaning and Care Filling Door Washing Drum Before cleaning the drain pump Cleaning the drain pump What to do if Remedying Faults RINSE+ SPÜLEN+ Repasser Rinse Spülen If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washing Carry Out an Emergency Emptying Operation Set Additional Rinse When all the washing solution has drained offCancel Additional Rinse Additional Rinse RINSE+/SPÜLEN+/RINCAGE+ Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Safety Instructions for Installation Setting up and connection instructions Transporting the Unit Setting Up the UnitRemove the Transport Safeguard When transporting the unit with a sack trolley Close off the hole with the plug cap G Firmly pull both hose holders off the unit Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Measurements in mm Technical DataDimensions Delivery Heads over 1m Schweiz Suisse Svizzera Page Page Index When do you incur costs even during the warranty period? Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG