Opening and Closing the Filling Door, Add the Washing | AEG 74740

Instructions for use

Opening and Closing the Filling Door

0 Open: Pull on the handle of the filling door.

0Close: Press the filling door firmly closed.

The displays DOOR (TÜR, PORTE) and START/ PAUSE show whether the door can be opened while the appliance is switched on:

	Display DOOR	Display START/PAUSE	Opening door possible?
	Glows green	Flashes red	Yes
	Glows green	Glows red	Yes, after pressing button
	Glows green	Glows red	START/PAUSE
			START/PAUSE
	Is off	Flashes or glows red	No1)

1) The main door is locked because of a high water level or a high temperature.

3	If
	– the display DOOR (TÜR, PORTE) flashes red

– then the error code E40 flashes in the multidisplay

– and the display MAIN WASH (HAUPTWÄSCHE, LAVAGE) flashes you tried to start a washing program without first closing the main door properly. In this case push the door shut firmly and restart the washing program.

Add the Washing

3	For the maximum filling quantities, refer to the ”Program Tables”.
	For information on the correct preparation of the washing, see ”Sort

and Prepare the Washing”.

01. Sort and prepare the washing according to type.

2.Open the filling door: Pull on the handle of the filling door.

3.Fill with washing.

Attention! When closing the door, make sure no items of washing get stuck! This could damage textiles and the unit.

4.Close the filling door securely.

22

Image 22

AEG 74740 manual Opening and Closing the Filling Door, Add the Washing

Contents

ÖKO-LAVAMAT 74740 update To any subsequent owners of the unit Dear customerPlease read this user information carefully Practical use of the unit Contents Remedying Faults What to do ifPage Before Putting into Operation for the First Time SafetyCorrect Use Child Safety General Safety Dispose the packing material DisposalEnvironment Tips For polyoxymethylene, e.g. plastic clips Front View Unit DescriptionDrawer for Washing Powder and Care Agent Control Panel Program Selector Wool WOLLE, LAINE/ P Handwash Minutes. This is followed automatically by the main wash Come effective at higher temperaturesAdditional Program Buttons Shorter washing cycle for slightly dirty washing Consumption Values and Time Requirements What Does Update Mean? Water Protection Aqua Control Prepare the Washing Cycle Before the First WashSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water Softener Brief Instructions Run a Washing CycleAfter the Washing Program Ends Setting the Washing Program Tables Revolutions Change Spin Speed / Select Rinse HoldPer minute Set the Delay Timer/Soaking Duration Soaking Duration Opening and Closing the Filling Door Add the Washing Compartment for pre-wash agent/soaking agent If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Or for water softener Is pressed Start the Washing ProgramIf the time preselection is set Program sequence display Completion of the Washing ProgramMultidisplay Select the Additional Program Changing a Washing ProgramChanging or aborting a program Change the Spin Speed Washing Cycle Ended/Remove Washing Program Tables Washing Type Separate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Cleaning the drain pump Before cleaning the drain pump Remedying Faults What to do if RINSE+ SPÜLEN+ Repasser Rinse Spülen If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation Additional Rinse RINSE+/SPÜLEN+/RINCAGE+ When all the washing solution has drained offCancel Additional Rinse Set Additional Rinse Feature Child Safety FeatureSetting the Child Safety Cancelling the Child Safety Feature Setting up and connection instructions Safety Instructions for Installation When transporting the unit with a sack trolley Setting Up the UnitRemove the Transport Safeguard Transporting the Unit Firmly pull both hose holders off the unit Close off the hole with the plug cap G Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Delivery Heads over 1m Technical DataDimensions Measurements in mm Schweiz Suisse Svizzera Page Page Index Service When do you incur costs even during the warranty period? AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG