Setting up and connection instructions
Compensate for Floor Unevenness
3 | Automatic Adjustment Foot: Your washing machine's rear left foot is |
| of a spring leg design. This guarantees good stability of the unit, even |
at high spinning speeds.
If the washing machine still does not stand firmly enough during spin- ning, proceed as follows:
01. Adjust the three adjustment feet
to the setpoint 10mm. To do this,
use the supplied special button to remove the transport safeguard.
If the automatic adjustment foot still does not reach the floor:
2. Manually extend the automatic adjustment foot (rear left) by the
necessary amount.
3. If necessary, check the setting with a spirit level.
Attention! Never use wood, card or similar underlays to compen-
sate for minor floor unevenness. Always use the adjustable
46
