Instructions for use
Set the Delay Timer/Soaking Duration
Delay Timer
The button DELAY TIMER (ZEITVORWAHL, DEPART DIFFERE) allows the start of a washing program to be advanced by 1 to a maximum of 19 hours.
0 To do this, press the button DELAY TIMER (ZEITVORWAHL, DEPART DIFFERE) as often as necessary until the required start delay is
shown in the multidisplay, e.g.12h in the form for a program start delay of 12 hours.
If19h is shown and you press again, 0h and afterwards the run time of the set washing program appears (display in minutes, e.g.126). In this state, the delay timer is not set.
| Soaking Duration |
| With the SOAKING button pressed, you can extend the soaking dura- |
| tion with the button DELAY TIMER (ZEITVORWAHL, DEPART DIFFERE) |
| (maximum 10 hours and approx. |
| 20 min.). |
3 | Without delay timer, the soaking duration is approx. 30 minutes, plus a |
|
0To set, press the button DELAY TIMER (ZEITVORWAHL, DEPART DIFFERE) as often as necessary until the required soaking duration is shown in the multidisplay, e.g.1h
(= 1 hour).
After approx. 2 seconds, the multidisplay shows the run time in minutes.
This run time is comprised as follows:
| selected soaking period | e.g. | – 1h =60 minutes |
| + heating up/prewash period | e.g. | approx. 20 minutes |
| + run time of the selected washing program e.g. | approx. 126 minutes | |
| = displayed value | e.g. | approx. 206 minutes |
3 | While SOAKING (EINWEICHEN, TREMPAGE) is running, PRE WASH | ||
| (VORWÄSCHE, PRELAVAGE) lights up on the program sequence display. | ||
21
