Remove the transport fittings from the storage shelves:

4. Slide the fittings securing the shelf forward to the thicker section on the edge of the storage shelf.

5. Take hold of the storage shelf at the back and together with the fit- tings slide the storage shelf far enough forward so that it can be hinged downwards and the fittings can be removed from the guides.

Fitting the Door Handles

To keep the amount of packaging down and to reduce the size for transporting, the door handles are not mounted when the appliance is delivered.

1 Take care! Do not tighten screws too tightly (max. 2 Nm), the door handles could be damaged.

The handles are packed separately on the padding in front of the door, the brackets and screws inside the appliance.

To mount, lay the appliance carefully on its back, if necessary. Use a piece of padding or a blanket as protection under the appliance.

01. Screw the top door bracket to the door handle (1). Mount the

bottom door bracket to the bottom of the door (2).

Important: Ensure door handle is correctly positioned

2. Mount top door bracket on the top of the door (3) and screw handle to bottom door bracket

(4).

818 36 55-00/3

9

Page 9
Image 9
AEG 86378-KG operating instructions Fitting the Door Handles, Remove the transport fittings from the storage shelves