12Display
Programme progress display
After having pressed the button 8, the display shows the running phase of the washing program 7.9. On the display you can see also the description of the selected type of fabric, an animated bar, that indicates the carried out cycle and the remaining one, the duration of the washing program and the end of cycle.
Delay start
If you have selected the button 9, the relevant symbol 7.5 appears on the display.
After having pressed the button 8, the selected delay time value (max 20 hours) appears on the right side of the display with the corrisponding symbol.
The delay time value decreases every minute.
Incorrect option selection
If an option, which is not compatible with the set washing programme, is selected, the message «Non selectable» is displayed for some seconds.
Alarm codes
In the event of operating problems, some alarm messages can be displayed, for example «Cannot fill water. Please check that the tap is open and then press START». (see chapter «What to do if...»).
End of the programme
When the programme has finished the corresponding message appears on the diplay. The button 8 pilot light goes off.
If your laundry is not removed during 10 minutes after the programme is finished, the backlight of the display switches off and the energy saving system will be enabled.
Only the button 8 pilot light is blinking to indicate that the appliance has to be switched off.
By pressing any button the appliance will come out from the energy saving status and you could set another washing programme or swich the appliance off.
