Operating Instructions
19
Activating/deactivating the acoustic signalIn addition to the optical display (e.g. indicating the end of the cycle,
errors) you can also choose to set an acoustic signal.
1. Press the ON/OFF button.
The LED in the ON/OFF button will become illuminated.
3 If other indicators are also illuminated, this means that a dishwashing
cycle has been activated. The dishwashing cycle must be deselected
(RESET):
Press function buttons 1and 2 simultaneously for approx. 2 seconds.
All other indicators will go out.
2. Press the function buttons 1and 2 simultaneously and keep them
pressed.
The LED indicator for function button 3 will flash.
3. Press function button 3.
The LED indicator for function button 3will flash.
The multi-display will indicate the current setting:
4. Pressing function button 3will change the setting.
5. Once the multi-display is indicating the required setting, press the ON/OFF
button.
The setting is now saved.
0b Acoustic signal deactivated
1b Acoustic signal activated (ex-factory setting)