Installation and Connection Instructions

 

Leak prevention system

 

To avoid damage caused by water leakage, the dishwasher is equipped

 

with a leak prevention system.

 

In the event of a fault, the safety valve in the appliance immediately

 

interrupts the inflow of water and the drain pump is activated. In this

 

way water can neither escape nor overflow. Any remaining water in the

 

appliance is automatically pumped out.

1

The leak prevention system also works when the appliance is switched

 

off – the appliance must however not be disconnected from the mains.

In the event of a fault when the appliance is switched on, a buzzing tone can also be heard.

Electrical connection

1

In compliance with electric company technical requirements for mains

 

connections, hard-wired connections to the mains may only be made

by approved electri-cians.

When connecting the appliance, observe the German VDE regulations and, if applicable, any additional conditions required by your local elec- tricity supplier. Following installation, live parts and live insulated wiring must not be accessible using a finger test in accordance with EN 60335/DIN VDE 0700.

Information on the electrical connection can be found on the rating plate on the right side of the inner edge of the dishwasher door. If the appliance has a change-over switch, the additional instructions on the change-over diagram in the mains connector box must be observed.

Prior to connecting ensure that the mains voltage and current rating at the site of installation match the nominal voltage and current rating given on the rating plate. The required fuse protection is also to be found on the rating plate.

To isolate the dishwasher from the mains, remove the mains plug. Important: The plug must still be accessible after the appliance has been installed.

If the appliance is hard-wired to the mains supply, then it must be safely isolated from the mains within the electrical installation with switches intended to ensure all-pole(N,L1)disconnection, shall be directly connected to the supply terminals and shall have a contact separation (fuses, cut outs, current trips or similar) of at least 3mm in each pole.

48

Page 48
Image 48
AEG 88050 I manual Leak prevention system, Electrical connection, With a leak prevention system

88050 I specifications

The AEG 88050 I is a premium kitchen appliance that epitomizes modern technology and design. As a versatile built-in oven, it is engineered to elevate the cooking experience, making it suitable for both professional chefs and home cooking enthusiasts.

One of the standout features of the AEG 88050 I is its advanced multi-functional cooking modes. It is equipped with various settings that allow for a wide array of cooking techniques, including baking, grilling, roasting, and steaming, ensuring that users have the flexibility to explore their culinary talents. The 88050 I seamlessly combines traditional convection cooking with innovative steam technology, providing moist and flavorful meals while preserving the nutritional value of ingredients.

The oven boasts a spacious capacity, typically around 70 liters, which accommodates large dishes and multiple trays simultaneously. This makes it ideal for families or when entertaining guests. Its interior is lined with enamel, making it easy to clean and maintain.

In terms of technology, the AEG 88050 I features an intuitive digital display that allows for easy navigation between cooking modes and settings. It includes an auto-cook feature that takes the guesswork out of cooking times and temperatures, ensuring perfect results every time. AEG has also integrated precise temperature control, ensuring consistent cooking results.

Another remarkable characteristic of the AEG 88050 I is its innovative heat distribution system. The oven utilizes a powerful fan that circulates hot air evenly throughout the cooking cavity, eliminating cold spots and ensuring that food is cooked uniformly. This technology not only improves the cooking performance but also saves energy, as the oven reaches the desired temperature quickly.

The design of the AEG 88050 I reflects a modern aesthetic, with sleek lines and a stainless-steel finish that makes it a stylish addition to any kitchen. Its seamless integration into kitchen cabinetry enhances the overall appearance, promoting a clean and organized look.

Safety is also a priority in the design of the AEG 88050 I. It incorporates features such as a cool-touch door and an automatic shut-off mechanism, ensuring that the oven operates safely even in busy kitchen environments.

In summary, the AEG 88050 I is a sophisticated built-in oven that offers a combination of advanced cooking technologies, versatile functionalities, and an elegant design. It represents a perfect blend of innovation and practicality, making it an exceptional choice for those who seek efficiency and excellence in their culinary creations.